In stock
Only %1 left
SKU
W12

CUSTOM HOSE - 1/8" x 5,000 PSI

As low as $20.90

The most flexible out of our high pressure hose selection is the 1/8” ID airless paint spray hose. Depending upon the fitting configuration this airless sprayer hose can be used with a Wagner airless paint sprayer, Graco airless paint sprayer or Kremlin air assisted airless paint sprayer. Ideally this high pressure hose is used with the least viscous spray coatings such as stains, lacquers and oil based paints. If a thicker spray coating is used, a larger ID high pressure paint hose is recommended to prevent clogging, such as our 3/16" ID pressure hose.

The 1/8” ID airless paint spray hose is commonly used in shorter lengths and referred to as a whip hose. Connecting the supply hose to the spray gun, this whip hose will reduce hand fatigue and provide great flexibility for the painter. Another popular length for the 1/8” ID high pressure hose is the 25 foot, which have been assembled on the Graco Merkur air assisted airless sprayer.

HOSE CONSTRUCTION AND SPECIFICATION

Core Polyamide
Braid High Tensile Brass Plated Carbon Steel
Cover Polyurethane
Hose I.D. - Inches 0.250
Hose I.D. - Millimeters 6.350
Hose O.D. - Inches 0.461
Hose O.D. - Millimeters 11.700
Maximum Working Pressure 5,000 PSI
Maximum Burst Pressure 20,000 PSI
Outer Jacket Color Dark Blue
Temperature Range - Celcius -40 to +93 C
Temperature Range - Fahrenheit -40 to +200 F
Minimum Bend Radius - Inches 1.772
Minimum Bend Radius - Millimeters 45.000
Write Your Own Review
You're reviewing:CUSTOM HOSE - 1/8" x 5,000 PSI
Your Rating
To Top