0

These Kremlin air assisted airless double groove spray tips (compatible products not manufactured by the OEM) are used with air assisted airless gun models ATX, AVX, MVX and XCITE.  Whether you require our standard or fine finish pre-atomizer versions for your air assisted sprayer, you can find the right paint spray tips to solve all your fluid handling requirements.  With our wide selection of airmix spray tips, you will always achieve a soft spray atomization in various spray patterns and orifice combinations.

Applying the spray coating at significantly lower pressures than a normal airless setup, your air assisted airless spray equipment will undergo less wear and tear allowing your finishing equipment to last longer; ultimately, resulting in less maintenance and clean up of your air assisted airless spray equipment.  By applying a small amount of air to aid in completing the pattern formation, you are able to achieve the fine finish results required while greatly reducing excessive bounce back of the spray coating.  Additional air assisted airless paint sprayer tip sizes available upon request and Kremlin air assisted airless high pressure hose in stock.

Our high quality non-oem aftermarket tips comparable to KREMLIN® air-assisted airless double groove spray tips are used with air-assisted airless gun models, ATX™, AVX™, MVX™, and XCITE®.  So start to shop and save big on all your fluid handling needs. 

 

NOTES:

KREMLIN®, AIRMIX®, and Xcite® are registered trademarks of Sames Kremlin SA or Exel Industries SA, and the same companies may claim unregistered trademark rights in other words. The advertised parts are intended to fit KREMLIN® and Xcite® spray equipment. They are not, however, manufactured, endorsed, or sponsored by Sames Kremlin SA or Exel Industries SA or any of their affiliates, and no warranty by Sames Kremlin SA, Exel Industries SA, or any of their affiliates applies. KM Coating, Inc. is not affiliated with or sponsored or endorsed by Sames Kremlin SA or Exel Industries SA and is not one of their authorized distributors.

These paint spray tips are compatible to the below parts:

STANDARD TIPS

134-503-034  134-503-054  134-503-074  134-503-094  134-504-034  134-504-054  
134-504-074  134-504-094  134-504-114  134-504-134  134-504-154  134-506-034  
134-506-054  134-506-074  134-506-094  134-506-114  134-506-134  134-506-154  
134-506-174  134-509-034  134-509-054  134-509-074  134-509-094  134-509-114  
134-509-134  134-509-154  134-509-174  134-512-034  134-512-054  134-512-074  
134-512-094  134-512-114  134-512-134  134-512-154  134-512-174  134-514-034  
134-514-054  134-514-074  134-514-094  134-514-114  134-514-134  134-514-154 
134-514-174  134-518-034  134-518-054  134-518-074  134-518-094  134-518-114  
134-518-134  134-518-154  134-518-174  134-520-034  134-520-054  134-520-074  
134-520-094  134-520-114  134-520-134  134-520-154  134-520-174  134-520-194  
 
134.503.034  134.503.054  134.503.074  134.503.094  134.504.034  134.504.054  
134.504.074  134.504.094  134.504.114  134.504.134  134.504.154  134.506.034  
134.506.054  134.506.074  134.506.094  134.506.114  134.506.134  134.506.154  
134.506.174  134.509.034  134.509.054  134.509.074  134.509.094  134.509.114  
134.509.134  134.509.154  134.509.174  134.512.034  134.512.054  134.512.074  
134.512.094  134.512.114  134.512.134  134.512.154  134.512.174  134.514.034  
134.514.054  134.514.074  134.514.094  134.514.114  134.514.134  134.514.154 
134.514.174  134.518.034  134.518.054  134.518.074  134.518.094  134.518.114  
134.518.134  134.518.154  134.518.174  134.520.034  134.520.054  134.520.074  
134.520.094  134.520.114  134.520.134  134.520.154  134.520.174  134.520.194 

 

FINE FINISH TIPS

134-503-032  134-503-052  134-503-072  134-503-092  134-504-032  134-504-052
134-504-072  134-504-092  134-504-112  134-504-132  134-504-152  134-506-032
134-506-052  134-506-072  134-506-092  134-506-112  134-506-132  134-506-152
134-506-172  134-509-032  134-509-052  134-509-072  134-509-092  134-509-112
134-509-132  134-509-152  134-512-072  134-512-092  134-512-112  134-512-132
134-512-152  134-512-172  134-514-032  134-514-072  134-514-092  134-514-112
134-514-132  134-514-152  134-514-172  134-518-132  134-518-152  134-518-172
134-520-072  134-520-092  134-520-112  134-520-132  134-520-152  134-520-172
134-520-192
 
134.503.032  134.503.052  134.503.072  134.503.092  134.504.032  134.504.052  
134.504.072  134.504.092  134.504.112  134.504.132  134.504.152  134.506.032  
134.506.052  134.506.072  134.506.092  134.506.112  134.506.132  134.506.152  
134.506.172  134.509.032  134.509.052  134.509.072  134.509.092  134.509.112  
134.509.132  134.509.152  134.512.072  134.512.092  134.512.112  134.512.132  
134.512.152  134.512.172  134.514.032  134.514.072  134.514.092  134.514.112  
134.514.132  134.514.152  134.514.172  134.518.132  134.518.152  134.518.172  
134.520.072  134.520.092  134.520.112  134.520.132  134.520.152  134.520.172  
134.520.192

 

Post comments

Leave A Reply

Your email address will not be published.